#150 Cross handle(to be used as skewer stud or for manual operation )W/D/H 9.25"x9.25"x4.92" (235x235x125mm)

#160 Fortified cross handle(skewer stud for preparation of the meat)W/D/H 13.77"x13.77"x4.13" (350x350x105mm)
#210 Platter 7.67" diam. (195mm) 
#220 Platter 4.72" diam. (120mm) 
#221 Platter 5.90" diam. (150mm) 
#222 Platter 9.84" diam. (250mm) 
#223 Platter 11.81" diam. (300mm) 
#224 Platter 13.78" diam. (350mm) 
#240 Slotted Platter 7.67" diam. (195mm) 
#241 Slotted Platter 4.72" diam. (120mm) 
#242 Slotted Platter 9.84" diam. (250mm) 
#243 Slotted Platter 11.81" diam. (300mm) 
#244 Slotted Platter 13.78" diam. (350mm) 
#250 Platter with Extended Skewer Guide for GD1
#251 Platter with Extended Skewer Guide for GD2
#252 Platter with Extended Skewer Guide for GD3
#253 Platter with Extended Skewer Guide for GD4
#254 Platter with Extended Skewer Guide for GD5
#260 Shovel, size #1 8.66" diam. (220mm)
#270 Shovel, size #2 10.24" diam. (260mm)
#280 Shovel, size #3 11.81" diam. (300mm)
#300 Motor, 110V/60 Hz incl. stainless steel housing and sliding sleeve, 1rpm,left-hand or right-hand rotation, as well as
off-position by actuation of the switch.

#310 Motor, 230V/60 Hz incl. stainless steel housing and sliding
sleeve,1rpm,left-hand or right-hand rotation, as well as
off-position by actuation of the switch.

#320 Motor, 12V/60 Hz incl. stainless steel housing and sliding
sleeve,1rpm,left-hand or right-hand rotation, as well as
off-position by actuation of the switch. (No Plug included)
#480 Octangular grease pan incl. perforated plate for
NA-GD1-LPG ; NA-GD1-NG ; NA-GD2-LPG;
NA-GD2-NG ( 500x500x50mm)
#490 Octangular grease pan incl. perforated plate for
NA-GD3-LPG ; NA-GD3-NG ; NA-GD4-LPG;
NA-GD4-NG (550x550x50mm)
#500 Octangular grease pan incl. perforated plate for
NA-GD5-LPG ; NA-GD5-NG ; (650x650x50mm)
#510 Support for the bottom guide arm when overloads by the
weight of the meat occurs for NA-GD3-LPG ;
NA-GD3-NG; NA-GD4-LPG;NA-GD4-NG
#520 Support for the bottom guide arm when overloads by the
weight of the meat occurs for NA-GD5-LPG ;
NA-GD5-NG

#530 Grease pan for NA-GD1-LPG ; NA-GD1-NG round
320mm diam. depth 42mm
#540 Rectangular grease pan incl. perforated plate 500x350x55mm
#550 Rectangular grease pan incl. perforated plate 410x310x55mm

 

#1040 Vertical grill arrangement for NA-GD2-NG;
NA-GD2-LPG; NA-GD3-NG, NA-GD3-LPG and NA-E2
composed of: 1 special platter;1 guiding platter; 6 skewers
24 forks and 1 cam.
Click here find out about more applications.

#1050 Vertical grill arrangement for NA-GD4-NG,
NA-GD4-LPG, NA-E3 composed of: 1 special platter;
1 guiding platter; 6 skewers, 36 forks and 1 cam.
Click here find out about more applications.
#1130 Meat preparation KIT

#110 Top sliding sleeve, complete, incl. thrust ring for NA-GD1-LPG; NA-GD1-NG 
#120 Top sliding sleeve, complete, incl. thrust ring for NA-GD2-LPG; NA-GD2-NG;NA-GD3-LPG;NA-GD3-NG; NA-GD4-LPG; NA-GD4-NG; NA-GD5-LPG; NA-GD5-NG
#130 Bottom sliding sleeve, complete, incl. bearing for NA-GD1-LPG; NA-GD1-NG
#140 Bottom sliding sleeve, complete, incl. bearing for NA-GD2-LPG; NA-GD2-NG; NA-GD3-LPG;NA-GD3-NG;
NA-GD4-LPG; NA-GD4-NG; NA-GD5-LPG; NA-GD5-NG
#170 Skewer for NA-GD1-LPG; NA-GD1-NG 16.34" (415mm)
#180 Skewer for NA-GD2-LPG; NA-GD2-NG;
 NA-GD3-LPG;NA-GD3-NG 27.36" (695mm)
#190 Skewer for NA-GD4-LPG; NA-GD4-NG 35.23"(895mm)
#200 Skewer for NA-GD5-LPG; NA-GD5-NG 42.51" (1080mm)
#230 Skewer cramp
#290 Shovel handle incl. clamping bolt

#330 Motor, housing excl.
#340 Motor, housing and gearing excl. (coil)
#350 Gearing
#360 Condenser
#370 Skewer conduction
#380 Top sliding sleeve incl. thrust ring
 #390 Fixing screw
#400 Countering handle
#410 Silicon cable 180 degr. C resistance $ 43 Screw -type conduit fitting
#420 Screw Type Counduit Fitting
#430 Clamping Angle
#440 Direction Rotation Switch 
#450 Motor plug 
#460 12V Motor 1 RPM included stainless steel housing
#470 12V Motor 1 RPM excluded housing 


#560 Dual burner incl. nozzle for NA-GD1-LPG; NA-GD2-LPG ;
NA-GD3-LPG; NA-GD4-LPG;NA-GD5-LPG

#570 Dual burner incl. nozzle for NA-GD1-NG; NA-GD2-NG ;
NA-GD3-NG; NA-GD4-NG;NA-GD5-NG
#580 Main gas nozzle
#590 Burner plate incl. 6 gaskets
#620 Combustion gratings for NA-GD1-LPG; NA-GD1-NG
#630 Combustion gratings for NA-GD2-LPG; NA-GD2-NG
#640 Combustion gratings for NA-GD3-LPG; NA-GD3-NG
#650 Combustion gratings for NA-GD4-LPG; NA-GD4-NG
#660 Combustion gratings for NA-GD5-LPG; NA-GD5-NG
#670 Gas tap, complete incl. knob and thermocouple for LPG
#680 Gas tap, complete incl. knob and thermocouple for NG
#690 Gas tap knob
#700 Thermocouple
#710 Magnetic coil
#720 Limiting nozzle
#730 Nozzle set to change from NA-GD1-LPG to NA-GD1-NG
#740 Nozzle set to change from NA-GD2-LPG to NA-GD2-NG
#750 Nozzle set to change from NA-GD3-LPG to NA-GD3-NG
#760 Nozzle set to change from NA-GD4-LPG to NA-GD4-NG
#770 Nozzle set to change from NA-GD5-LPG to NA-GD5-NG
#780 Nozzle set to change from NA-GD1-NG to NA-GD1-LPG
#790 Nozzle set to change from NA-GD2-NG to NA-GD2-LPG
#800 Nozzle set to change from NA-GD3-NG to NA-GD3-LPG
#810 Nozzle set to change from NA-GD4-NG to NA-GD4-LPG
#820 Nozzle set to change from NA-GD5-NG to NA-GD5-LPG

#830 Front panel right for NA-GD1-NG and NA-GD1-LPG
#840 Front panel left for NA-GD1-NG and NA-GD1-LPG
#850 Front panel right for NA-GD2-NG and NA-GD2-LPG
#860 Front panel left for NA-GD2-NG and NA-GD2-LPG
#870 Front panel right for NA-GD3-NG and NA-GD3-LPG
#880 Front panel left for NA-GD3-NG and NA-GD3-LPG
#890 Front panel right for NA-GD4-NG and NA-GD4-LPG
#900 Front panel left for NA-GD5-NG and NA-GD5-LPG

#910 Lateral cleats left for NA-GD1-NG and NA-GD1-LPG
#920 Lateral cleats right for NA-GD1-NG and NA-GD1-LPG
#930 Lateral cleats left for NA-GD2-NG and NA-GD2-LPG
#940 Lateral cleats right for NA-GD2-NG and NA-GD2-LPG
#950 Lateral cleats left for NA-GD3-NG and NA-GD3-LPG
#960 Lateral cleats right for NA-GD3-NG and NA-GD3-LPG
#970 Lateral cleats left for NA-GD4-NG and NA-GD4-LPG
#980 Lateral cleats right for NA-GD4-NG and NA-GD4-LPG
#990 Lateral cleats left for NA-GD5-NG and NA-GD5-LPG
#1000 Lateral cleats right for NA-GD5-NG and NA-GD5-LPG
 #1010 Retaining cleats for burner plate
#1020 Intermediate slit

#1030 Vertical grill arrangement for NA-GD1-NG,
NA-GD1-LPG and NA-EH models: 1 special platter, 6 skewers
and 1 cam.